
MO Key setup
Each MO Key comes with a longer and shorter chicago screw set to allow you to carry 2-6 keys and a set of brass washers to use as spacers between the keys to keep the keys tight. To adjust the number of keys carried see our guide below.
adding the keys
Unscrew the chicago screw and place keys over the thin brass chicargo bolt, using brass washers in between keys, to fill out space if needed when holding fewer keys.
then screw in the brass chicago screw head tightening to the desired level.


2-4 Keys
For a smaller amount of keys, use the smaller chicago screw set.
For 2 keys, use the washers provided as spacers before, between and after the keys.
For 3 keys, use the washers provided between the keys.
For 4 keys, the keys should fit snugly without the need to use the washers.
​
4-6 Keys
For a larger amount of keys, use the larger chicago screw set.
For 4 keys, use the washers provided as spacers before, between and after the keys.
For 5 keys, use the washers provided between the keys.
For 6 keys, the keys should fit snugly without the need to use the washers.


attachments
You can use the smaller split ring to attach car keys or other accessories to the larger split ring.
​
The larger Split ring is ideal for attaching to key clips or chains and is comfortable to carry in your hands looped over one finger.
​
Care
To clean the cork material simply wipe the cork leather with a damp cloth using a little soap and water.



For more information on why we chose to design our products to be assembled by you, see our Morals.
​